I-LQ-HFS I-Hot Stamping Foil yephepha noma isitembu sepulasitiki

Incazelo emfushane:

Yenziwa ngokungeza ungqimba lwe-foil yensimbi esisekelweni sefilimu ngokusebenzisa i-coating kanye ne-vacuum evaporation. Ugqinsi lwe-aluminium anodized ngokuvamile (12, 16, 18, 20) μ m. Ububanzi obungu-500 ~ 1500mm. Ucwecwe lokugxiviza olushisayo lwenziwa ngelendlalelo yokukhululwa enamathelayo, isendlalelo sombala, i-vacuum aluminium bese imboza ifilimu kufilimu, futhi ekugcineni ibuyisela emuva umkhiqizo oqediwe.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Isici

1.Ukuhlubula okulula nokuhlanzekile;

2.Ukukhanya okuphezulu;

3.Ukusebenza kahle kokunquma, imigqa emihle ngaphandle kwegolide elindiza;

I-4.Umkhiqizo unezici zokunamathela okuqinile

Isakhiwo se-Foil

● Isendlalelo sokunamathisela(Glue).

● Isendlalelo se-Aluminium

● I-Hologram Layer

● Khipha Isendlalelo

● PET base ifilimu

Isicelo

1. Amalebula, okuhlanganisa imikhiqizo yansuku zonke yamakhemikhali, izidakamizwa, ukudla, imikhiqizo yezempilo, njll;

2. Isikhwama sikagwayi Imakethe;

3. Ukupakishwa kwangaphandle kwephakheji yotshwala.

Ifilimu yesisekelo ye-PET: Sekela i-coating enamathiselwe kuyo futhi wenze lula isenzo esiqhubekayo ngesikhathi sokucubungula isitembu esishisayo. Lokhu kubonisa ukuthi ungqimba lwefilimu oluyisisekelo alukwazi ukukhubazeka ngenxa yokwenyuka kwezinga lokushisa enqubweni yokushisa isitembu. Kufanele ibe nezakhiwo zamandla aphezulu, amandla aqinile, ukumelana nokushisa okuphezulu nokunye.

Isendlalelo sokukhishwa:Ngemva kokunyathela okushisayo, kungakhathaliseki ukuthi ngaphambi kokufudumeza noma ukucindezela, kuzokwenza ungqimba lwe-pigment, i-aluminium kanye ne-adhesive ihlukane ngokushesha nefilimu futhi idluliselwe futhi ihlanganiswe ebusweni bento eshisayo yokugxiviza,

Isendlalelo se-hologram: Bonisa umbala futhi uvikele izithombe ezi-aluminium nemibhalo ephrintiwe ebusweni bendatshana ekusetshenzisweni kwe-oxidation.

Isendlalelo se-Aluminium:Veza ukukhanya, shintsha imvelo yombala wesendlalelo sombala, futhi uwenze ucwebezele

Isendlalelo seglue:Bopha into eshisayo yokugxiviza entweni eshisayo.

Ukucaciswa

1. Ukuqina	12um±0.2um	Indlela yokuhlola: DIN53370
2. I-Surface Tension	29 --- 35Dyne/cm
3. Amandla E-Tension(MD)	≥220Mpa	Indlela yokuhlola: DIN53455
4. Amandla Okuqina (TD)	≥230Mpa	Indlela yokuhlola: DIN53455
5. I-Elongation at Break(MD)	≤140%	Indlela yokuhlola: DIN53455
6. I-Elongation at Break(TD)	≤140%	Indlela yokuhlola: DIN53455
7. Ukukhulula Amandla	2.5—5g
8. Ukuncipha ku-150℃/30min(MD)	≤1.7%	Indlela Yokuhlola: BMSTT11
9, Ukuncipha ku-150℃/30min(TD)	≤0.5%	Indlela Yokuhlola: BMSTT11
10. Ukuqina kwe-Aluminium	350±50X10(-10)M