Imithetho yokusika i-LQ-TOOL
Imithetho yokusika isibuko (CBM)
● Faka isibuko sommese obukhali
● Uhlobo olubili:＜52°,＜42°,＜30°
● Ifanele iphepha lokusika inani lingaphansi kwama-400000pcs
● Ingagotshwa kunoma yimuphi umumo wejometri.
● Izinto: DE
● Umphetho:I-CB LCB
| Ubukhulu | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Ubude | 23.6mm | 23.8mm |
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | I-engeli yonqenqema | Phawula |
| 0.71*23.6/23.8 | I-CBM-78 | Mnyama/Mhlophe | 30 degree | Ukuqina komphetho HRC55-56° Ukuqina komzimba HRC 35-36° |
| 0.71*23.6/23.8 | I-CBM-88 | Mnyama/Mhlophe | 42/45 degree | Ukuqina komphetho HRC57-58° Ukuqina komzimba HRC 37-38° |
| 0.71*23.6/23.8 | I-CBM-98 | Mnyama/Mhlophe | 52 degree | Ukuqina komphetho HRC58-59° Ukuqina komzimba HRC 40-41° |
Ukugaya Imithetho Yokusika
● Ummese ocijile ocijile onqenqemeni
● Uhlobo olubili: ＜52°, ＜42°, ＜30°
● Ifanele iphepha lokusika inani lingaphansi kuka-200000pcs
● Ingagotshwa kunoma yimuphi umumo wejometri
Material: KR, DE
Umphetho: A.CB, B.LCB
| Ubukhulu | 0.71mm (2PT) |
| Ubude | 22.8-30mm |
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.71mm | I-GL-70 | Umzimba Wegolide | I-Core Hardness Hrc36-37 (Ithambile) |
| I-GL-80 | I-Core Hardness 38-39 (Medium) | ||
| I-GLD-70 | I-Germany Materials (Ithambile) | ||
| I-GLD-80 | I-Germany Materials (Medium) |
Imithetho yokusika i-Gillet(GE)
Unqenqema lupholishiwe futhi lucijile, kwenza ikhono lomshini-lishintshe kakhulu.
Isetshenziselwa ifomu-Ukusika amalebula okunamathelayo, i-PVC nezinye izimpahla ze-slap-UP
Material: CN, DE
Umphetho: A.CB, B.LCB
| Ubukhulu | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Ubude | 23.6mm | 23.8mm |
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.71mm | GE-70 | Umzimba Omnyama Oluhlaza | I-Core Hardness Hrc36-37 (Ithambile) |
| GE-80 | Umzimba Omnyama Oluhlaza | I-Core Hardness 38-39 (Medium) | |
| I-GED-80 | Umzimba Omnyama Oluhlaza | Germany Materials | |
| 1.07mm | I-GRB-70 | Umzimba Omnyama Oluhlaza | I-Core Hardness Hrc36-37 (Ithambile) |
| I-GRB-80 | Umzimba Omnyama Oluhlaza | I-Core Hardness 38-39 (Medium) | |
| I-GRB-90 | Umzimba Omnyama Oluhlaza | I-Core Hardness 40-41 (Kanzima) |
Ilebula ilawula ummese ozinamathelayo (HL)
Isetshenziselwa ukwenza zonke izinhlobo zamalebula okunamathelayo
Ingagoba kunoma yimuphi umumo wejometri
Impahla: CN JP GM
Umphetho:A:Ummese weblade eyodwa CB , B:I-LCB ye-Double blade
| Ubukhulu | 0.45mm (1.27PT) |
| Ubude | 7.0-12.0mm |
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.45mm | HL-50 | Umphetho Omhlophe | Ukuqina Okuyisisekelo HRC41-43 |
| HL-60 | Unqenqema Olumnyama | Ukuqina Okuyisisekelo HRC39-40 | |
| HL-70 | Umzimba Omhlophe | Ukuqina Okuyisisekelo HRC39-40 | |
| HL-80 | Umzimba Wegolide | Ukuqina Okuyisisekelo HRC39-40 |
Imithetho Ekhethekile Yokusika (KL)
Isetshenziselwa ama-spacers, ipulasitiki, i-fiber nokunye, ucezu lokusika lungadlula ku-800000pcs
Ingagoba kunoma yimuphi umumo wejometri.
Impahla: CN JP GM
Umphetho:A:Ummese weblade eyodwa CB , B:I-LCB ye-Double blade
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.71mm | I-KL-70 | Umzimba Omnyama Oluhlaza | I-Core Hardness HRC 36-37° (ithambile) |
Ukusika Ikati Elimnyama (BL)
Isetshenziselwa ama-spacers, ipulasitiki, i-fiber nokunye, ucezu lokusika lungadlula ku-800000pcs.
Ingagoba kunoma yimuphi umumo wejometri.
Impahla: CN JP GM
Umphetho:A:Ummese weblade eyodwa CB , B:I-LCB ye-Double blade
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.71mm | I-BL-80 | Umzimba Omnyama Oluhlaza | I-Core Hardness HRC 36-39° (Emaphakathi) |
Imithetho Ye-Perfpration(WL)
1.Amazinyo ayizikwele 3amazinyo/1”,4amazinyo/1”, 6amazinyo/1”, 8amazinyo/1”, {1:1}, 10amazinyo/1”, 16amazinyo/1”
2.Isetshenziselwa ukusika ifomu lesikweletu
Impahla: □CN
I-Edge: Ukugaya Umphetho
| Ubukhulu | 0.45mm (1.27PT) | 0.71mm (2PT) | ||
| Ubude | 8mm | 23.6mm | 23.8mm | |
| Usayizi | 1:1;2:1;3:1;6:1;8:1;10:1;12:1;16:1 | |||
| Ubukhulu bokucaciswa | Inombolo | Umbala womzimba | Phawula |
| 0.71mm | WL-90 | Umzimba Omnyama Oluhlaza | I-Core Hardness HRC 40-41° (Kanzima) |
Imithetho Yamazinyo Abukhali (WLS)
1. Umsiki wehlelo elikabili
2. Amazinyo abukhali 16/1''
3. Isetshenziselwa ikhefu elihlaba umxhwele kancane kancane Ukucaciswa:510×8.16×0.75mm(umthetho wefomu lebhizinisi onqenqemeni olulodwa), (2:1,3:1,1:1)
Material: CN, JP, GM
Umphetho: CB,LCB
| Ubukhulu | 0.71mm(2PT） |
| Ubude | 23.0-23.8mm |
| Ukujiya kokucaciswa | Inombolo | Chaza | Phawula(ubulukhuni）izidingo |
| 0.71mm | I-WLS-90 | Umzimba Omnyama Oluhlaza | Ukuqina Kokuqina Hrc40~41(Kunzima） |
I-One-side Cutter(DEX)
1. Isetshenziselwa ukusika ifomu le-engeli elungile
Material: CN, JP, GM
Umphetho: CB, LCB
| Ubukhulu | 0.71mm (2PT) | 1.07mm (3PT) |
| Ubude | 22.8-50.0mm | |
| Ukujiya kokucaciswa | Inombolo | Chaza | Phawula (ubunzima) izidingo |
| 0.71mm | I-DEX-90 | Umzimba Omnyama Oluhlaza | I-Core Hardness Hrc40~41 (Kanzima) |
Imithetho Yokusika Okuphezulu(DLX)
1 Isetshenziselwa ukusika ifomu lebhokisi nokunye
Material: CN, JP, GM
Umphetho: CB, LCB
| Ubukhulu | 0.71mm (2PT) | 1.07mm (3PT) |
| Ubude | 30.0-50.0mm | |
| Ubukhulu bokucaciswa | Inombolo | Chaza | Phawula |
| 0.71mm | I-DLX-80 | Umzimba Omnyama Oluhlaza | I-Core Hardness Hrc38~39 (Medium) |
| 1.07mm | I-DLE-80 |
Imithetho Enyakaziswayo(BL)
1.Ukuphakama kokuhlaba umxhwele kwenziwa ngokwesicelo sakho
2. Isetshenziselwa ibhokisi nebhokisi A UHLOBO 10 PCS/ B UHLOBO 8PCS /C UHLOBO 6PCS/D UHLOBO 4.5PCS/E UHLOBO 3PCS
Material: CN, JP, GM
I-EDGE: CB, LCB
| Ubukhulu | 0.71mm (2PT) |
| Ubude | 23.6-23.8mm |
| Ubukhulu bokucaciswa | Inombolo | Chaza | Phawula |
| 0.71mm | I-BL-70 | Umzimba Omnyama Oluhlaza | Ukuqina Okukhulu Hrc 36~37 |
Ukwakha Imithetho
1 Ukuphakama kokuhlaba umxhwele okwenziwe ngokwesicelo sakho
2 Ubukhulu yi-(2PT) 0.71mm,(3PT)1.07mm,(4PT)1.42mm,(6PT)2.10mm
Material: CN, JP, GM
Umphetho: CB, LCB
| Ubukhulu | 0.71mm(2PT) | 1.07mm(2PT) | 1.42mm(2PT) | 2.10mm(2PT) |
| Ubude | 22.8 ~ 30.0mm | |||
| Ubukhulu bokucaciswa | Inombolo | Chaza | Phawula |
| 0.71mm | EL-90 | Umzimba Omnyama Oluhlaza | Ukuqina Okukhulu Hrc 41~43 |
| ELD-90 | Umzimba Omhlophe | Ukuqina Okuyisisekelo Hrc43~45 | |
| EL-70 | I-Taiwan | I-Core Hardness Hrc38~39(Medium) | |
| EL-80 | I-Taiwan | I-Core Hardness Hrc35~36(Soft) | |
| 1.07mm | ELD-70 | Umzimba Omnyama Oluhlaza | Ukuqina Okuyinhloko Hrc37 |
| ELD-80 | Umzimba Omnyama Oluhlaza | Ukuqina Okuyinhloko Hrc39 | |
| 1.42mm | ELC-70 | Umzimba Omnyama Oluhlaza | Ukuqina Okuyinhloko Hrc36 |
| 2.1mm | ELB-70 | Umzimba Omnyama Oluhlaza | Ukuqina Okuyinhloko Hrc35 |
| 0.71mm | I-EV-90 | Umzimba Omnyama Oluhlaza | I-Core Hardness Hrc41~43(I-Top Thin Creasing) |
Isifinyezo sezakhi eziyinhloko zommese wokufa wokusika
| Uhlobo Lommese | Ummese Onezinsingo eziphansi/Ummese onezitezi ezimbili/ Ummese Ohlangothi Olulodwa/ Ummese Wokuzulisa/ Ummese Wezinyo/ Umbese Wenhlanganisela |
| Uhlobo Lwensimbi | /S50C/C55 |
| Ubukhulu(mm) | 0.45/0.53/2pt/3pt/4pt/6pt |
| Ubude (mm) | 7.0/8.0/9.5/12/23.5/23.6/23.7/23.8/30～100mm |
| Ubunzima bomzimba (Hrc) | 33/37/41/45/48/ |
| I-Blade hardnes(Hrc) | 54/56/58/60/ |
| I-Blade Angle | ∠30° ∠42° ∠52° |
| Abanye | Ukuqina kokwelashwa kokushisa okuphezulu, ukugaya konqenqema lommese, ukucutshungulwa kwesibuko sommese. |
Ububanzi bokubekezelela ukuqina kwemithetho ye-CUTTING
| UbukhuluInkulumo | Ireferensi | Amazwe ngamazweOkujwayelekile | Izindinganiso Zebhizinisi | |
| Ukubekezelelana | Okuncane～Max | |||
| 0.45 | 0.44 | ±0.025 | ± 0.010 | 0.430-0.450 |
| 2PT | 0.71 | ±0.030 | ± 0.010 | 0.700-0.720 |
| 3PT | 1.05 | ±0.040 | ± 0.010 | 1.050-1.070 |
| I-4PT | 1.42 | ±0.050 | ± 0.015 | 1.395-1.425 |
Umthelela we-Blade Angle Emkhiqizweni
Ukukhetha i-Blade
1. Umehluko Wemimese Ebukhali Naphansi
Umehluko phakathi kwemimese enemiphetho ephezulu kanye nephansi ukuthi ummese obukhali kakhulu usekelwe kummese obukhali bese ugaya amakhona nhlangothi zombili ukuze wenze inkaba yawo ibe mncane, ngokuvamile cishe ngo-2mm.
Iphakheji
| Ubukhulu | Inani le-Carton Box | Ikhoyili |
| 0.45mm (1.27PT) | 100Pcs/Ibhokisi | 100M/Ikhoyili |
| 0.53mm (1.5PT) | 100Pcs/Ibhokisi | 100M/Ikhoyili |
| 0.71mm (2PT) | 100Pcs/Ibhokisi | 100M/Ikhoyili |
| 1.07mm (3PT) | 70Pcs/Ibhokisi | 70M/Ikhoyili |
| 1.42mm (4PT) | 50Pcs/Ibhokisi | 50M/Ikhoyili |
| 2.10mm (6PT) | 35Pcs/Ibhokisi | 35M/Ikhoyili |
Indawo yesicelo
I-Die-Cutting yebhokisi lokupakisha
