Umboniso bhanyabhanya we-LQ-FILM weSidlo seSidlo (YeyoShicilelo lweDijithali)

Inkcazelo emfutshane:

Ifilimu yokudibanisa i-Thermal lamination yesidlo isetyenziswa ngokukodwa kwi-laminating yezixhobo eziprintiweyo ze-silicone isiseko se-oyile kunye nezinye izinto ezifuna impembelelo yokuncamathela, ekhethekileyo yoshicilelo lwedijithali nge-inki engqindilili kunye neoli ye-silicone eninzi.

Le filimu ilungele ukusetyenziswa kwizinto eziprintiweyo kusetyenziswa oomatshini bokushicilela bedijithali, abafana ne-Xerox(DC1257, DC2060, DC6060), HP, Kodak, Canon, Xeikon, Konica Minolta, Founder kunye nabanye. Ikwanokulanywa kakuhle kakhulu kumphezulu wezinto ezingezizo iphepha, njengefilimu yePVC, ifilimu ye-inkjet yentengiso yangaphandle.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Ifilimu esisiseko Iglosi kunye noMat BOPP
Ukutyeba 30micron
Ububanzi 310,320,330,457,520,635mm
Ubude 200m, 500m, 1000m

Inzuzo

1. Iimveliso ezigqunywe ngohlobo lwe-melt precoating aziyi kubonakala ziphosa amagwebu kunye nefilimu ewayo, kwaye ubomi benkonzo yeemveliso bude.

2. Kuba iimveliso eziqatywe nge-solvent volatile precoating pre, ukuwa kwefilimu kunye nogwebu kuya kwenzeka kwiindawo apho inki yoshicilelo ingqindilili kakhulu, uxinzelelo lokusonga, ukusika kunye nokufaka i-indentation inkulu kakhulu, okanye kwindawo eneworkshop ephezulu. ubushushu.

3. Ifilimu yokucoca i-Solvent volatile precoating kulula ukunamathela kuthuli kunye nolunye ukungcola ngexesha lemveliso, ngaloo ndlela ichaphazela umphumo wemveliso egqunyiweyo.

4. Iimveliso ezifakwe kwifilimu aziyi kugoba ngokwesiseko.

Inkqubo

1. Ubukhulu befilimu buphakathi kwe-0.01-0.02MM. Emva kwe-corona okanye olunye unyango, ukunyanzeliswa komphezulu kufuneka kufikelele kwi-4.0 x 10-2n / m, ukwenzela ukuba ube neepropati ezingcono zokumanzisa kunye nokubopha.

2. Umphumo wonyango wefilimu ye-corona yonyango umphezulu ufana, kwaye ukuphakama okuphezulu, kungcono, ukwenzela ukuba kuqinisekiswe ukucaca okucacileyo koshicilelo olugqunyiweyo.

3. Ifilimu iya kuba nokumelana nokukhanya okulungileyo, akulula ukutshintsha umbala phantsi kwe-irradiation yokukhanya kwexesha elide, kwaye ubungakanani bejometri buya kugcinwa buzinzile.

4. Ifilimu iya kuqhagamshelana ne-solvents, i-adhesives, i-inki kunye nezinye iikhemikhali, kwaye ifilimu iya kuba ne-chemical stability ethile.

5. Ukubonakala kwefilimu kuya kuba tyaba, kungabi nazitenxo kunye nemibimbi, amaqamza, imingxunya ye-shrinkage, imingxuma kunye nezinye iziphene.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi