Self-adhesive Paper NW5609L
Key features
● Designed for short lifecycle labeling or weigh scale applications.
Applications and use
1. This thermo sensitive product is designed for weight scale printing.
● Exposure to sunshine or above 50°C should be avoided.
● With normalresistance to water, not recommend to use in harsh environments wherepossible contact with oil or grease, also not in watery environment for long time.
● Not suitable for Ladder barcode thermal print.
● Not recommendon the PVC substrate and not recommend for logistic label.
Technical Data Sheet (NW5609L)
| NW5609LDirect Therm
NTC14/HP103/BG40# WH imp |
 |
| Face-stock A bright white one side coated art paper with primer coating. |
|
| Basis Weight | 68 g/m2 ±10% ISO536 |
| Caliper | 0.070 mm ±10% ISO534 |
| Adhesive A general purpose permanent, rubber based adhesive. |
|
| Liner A super calendared white glassine paper with excellent roll label converting properties. |
|
| Basis Weight | 58 g/m2 ±10% ISO536 |
| Caliper | 0.051mm ± 10% ISO534 |
| Performance data | |
| loop Tack (st, st)-FTM 9 | 10.0 or Tear |
| 20 min 90°CPeel (st,st)-FTM 2 | 5.0 or Tear |
| 8.0 | 5.5 or Tear |
| Minimum Application Temperature | +10°C |
| After labeling 24Hours, Service Temperature Range | -15°C~+45°C |
| Adhesive Performance The adhesive features high initial tack and ultimate bond on a wide variety of substrates. It is suitable for applications where compliance with FDA 175.105 is required.This section covers applications where for indirect or incidental contact food, cosmetic or drug products. |
|
| Conversion/printing Printing testing is always recommended before production. Due to the thermal sensibility, in the process material temperature should not be more than 50°C. Solvent may cause damage to surface coating; care should be taken when using solvent based inks. Ink testing is always recommended before production. |
|
| Shelf life One year when stored at 23 ± 2°C at 50 ± 5% RH. |
|
Write your message here and send it to us
