Self-adhesive Paper AW5200P

Short Description:

Spec Code: AW5200P

Semi-gloss

Paper/HP103/BG40#WH ni

A bright white one side coated art paper with primer coating.


Product Detail

Product Tags

Key Features

● Typical applications are blank die-cutting and code printing.

Applications and use

10002

1. Typical applications are blank die-cutting and code printing.

2. It's suitable for flat or simple curve substrates, including paperboard, film and HDPE.

! Not recommend on the PVC substrates and small diameter surfaces.

1

Technical Data Sheet (AW5200P)

AW5200PSemi-gloss  

Paper/HP103/BG40#WH 

ni

AW5200P 02
Face-stockA bright white one side coated art paper.
Basis Weight 80 g/m2     ±10%   ISO536
Caliper   0.068 mm  ±10%   ISO534
AdhesiveA general purpose permanent, rubber based adhesive.
LinerA super calendered white glassine paper with excellent roll label converting properties.
Basis Weight 58 g/m2 ±10%   ISO536
Caliper  0.051mm    ± 10%  ISO534  
Performance data  
loop Tack (st,st)-FTM 9 13.0 or Tear (N/25mm)
20 min 90 Peel (st, st)-FTM 2 6.0 or Tear
24 hour 90 Peel (st, st)-FTM 2  7.0 or Tear
Minimum Application Temperature 10 °C  
After labeling 24Hours, Service Temperature Range  -15°C~+65°C
Adhesive Performance
The adhesive features excellent initial tack and ultimate bond on a wide variety of substrates.
It is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where for indirect or incidental contact food, cosmetic or drug products.
Conversion/printing
This super calendered semi-gloss face-stock provides excellent printing quality by all the usual printing techniques, whether single or multicolor, line or process color printing.
Cares should be taken with the ink viscosity during printing process, too
high viscosity of ink will damage the surface of paper.
It will cause the label bleeding if the press of rewinding roll is large.
We recommend simple text printing and bar code printing.
Not suggestion for extremely fine bar coding design.
Not suggestion for solid area printing.
Shelf life
One year when stored at 23 ± 2°C at 50 ± 5% RH.

 


  • Previous:
  • Next:

  • Write your message here and send it to us