Self-adhesive Film BW7776
Spec Code: BW7776
Standard Clear PE 85/ S692N/ BG40#WH imp A.
Standard Clear PE 85 is a transparent polyethylene film with medium gloss and without top coating.
Spec Code: BW9577
Standard White PE 85/ S692N/ BG40#WH imp A.
Standard White PE 85 is a white polyethylene film with medium gloss and without top coating.
Key features
● Comply with environmental requirements.
● The material is soft and has a wide application. Great water resistance property.
Applications and use
1. Due to its flexibility the product is especially suitable for substrates like plastic bags, squeezable bottles and other flexible containers.
2. The product can also be used for applications where PVC labels are not wanted for environmental reasons.
Technical Data Sheet (BW7776)
| BW7776, BW9577 Standard Clear PE 85/ S692N/ BG40#WH imp A |
 |
| Face-stock A transparent polyethylene film with medium gloss appearance. |
|
| Basis Weight | 80 g/m2 ±10% ISO536 |
| Caliper | 0.085 mm ± 10% ISO534 |
| Adhesive A general purpose permanent, acrylic based adhesive. |
|
| Liner A super calendared white glassine paper with excellent roll label converting properties |
|
| Basis Weight | 60 g/m2 ±10% ISO536 |
| Caliper | 0.051mm ±10% ISO534 |
| Performance data | |
| loop Tack (st, st)-FTM 9 | 10.0 |
| 20 min 90°CPeel (st, st)-FTM 2 | 5.5 |
| 8.0 | 7.0 |
| Minimum Application Temperature | -5°C |
| After labeling 24Hours, Service Temperature Range | -29°C~+93°C |
| Adhesive Performance It is a clear permanent adhesive designed for prime labeling applications including squeezable and clear labeling applications. Specifically designed to exhibit excellent wet-out characteristics on clear films. It is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where for indirect or incidental contact food,cosmetic or drug products. |
|
| Conversion/printing The corona treated face material can be printed by letterpress, flexor, and silk screen, giving good print results with UV curing and water based inks. Ink testing is always recommended before production. Cares should be taken with the heat during process. Sharp film toolings preferably in flat-bed, are important to ensure smooth conversion. Acceptance of hot stamping foil is excellent. Need avoid too much re-winding tension to causing bleeding. |
|
| Shelf life One year when stored at 23 ± 2°C at 50 ± 5% RH. |
|
Write your message here and send it to us
