LQ-Metal blanket for sheet fed printing&metal graphics

Short Description:

LQ Metal blanket is appropriate to good quality sheet fed printing&metal graphics. Excellent dimensional stability; improved smash and edge marking resistance; the optimum thickness of ink layer provides excellent dot reproduction. Minimal dot gain, appropriate to small dot printing.

Send email to us

Product Detail

Problem Solving

Product Tags

Specifications

Construction	Plies fabrics
Type	Microsphere
Surface	Micro-ground
Roughness	0.90– 1,00 μm
Hardness	76 - 79 shore A
Elongation	≤ 0.9 % at 500 N/5cm
Compressibility	13-16
Colour	Blue
Thickness	1.97mm
Thickness tolerance	+/- 0,02mm

Structure

Blanket On Machine

Precautions during usage

Metal blanket for sheet fed printing&metal graphics

3.The rubber blanket surface should be acid and oil resistant to prevent its surface layer from being damaged. The rubber blanket is often in contact with oil, which will cause its aging and finally loosen its internal organization. The blanket is often in contact with acidic substances, which will cause its surface corrosion. Wash with fast volatile detergent, such as gasoline, instead of kerosene and other slow volatile substances.

4. The rubber blanket surface shall be kept clean. The effective part of printing needs to be kept clean frequently.

Warehouse and package

Previous: LQ-AB Adhesion Blanket For Offset Printing

Next: LQ-AB Adhesion Blanket For Offset Printing

Pre-sales Q&A

Question	Answer
1.What types of printing blanket are there?	Common types include full air cushion, air cushion, three-in-one, traditional, UV special, local gloss, metal printing 2PSC, wear-resistant, paper cup special, UV self-adhesive, report machine self-adhesive, aluminum strip, etc.
2.How to choose the right printing blanket?	It is selected according to the type of printing machine, material of printed products, printing technology (such as UV printing, metal printing, etc.), printing quality requirements (such as dot reduction, ink transfer, etc.) and printing environment, etc.
3. Does the thickness of blanket affect printing?	It has influence. The thickness will affect the distribution of printing pressure and the transfer effect of ink. Different printing machines and printing requirements have different requirements for blanket thickness.
4. What is the function of surface treatment of blanket?	Surface treatment can improve the ink transfer performance, wear resistance, chemical resistance and so on of blanket, so as to improve printing quality and extend service life.
5. How long is the life of blanket?	The life depending on the frequency of use, printing conditions, maintenance and other factors.
6.Is the price difference of blanket large?	The price difference is large, mainly affected by material, process, brand, specification and other factors.
7. What should be paid attention to when installing blanket?	When installing, make sure the blanket is flat, no wrinkles, no bubbles, and adjust the pressure and tension correctly.
8.What are the storage requirements for blanket?	It should be stored in a cool, dry environment away from heat sources and avoid direct sunlight. It is best to place it flat or hang it on a pole.
9.What are the suggestions for cleaning and maintaining blanket?	After printing, it should be cleaned in time to avoid the accumulation of ink, paper scraps and other residues; Check the surface of the blanket regularly for damage or aging.
10.What information is required when purchasing blanket?	The printing machine model, printing paper type, printing process requirements, printing quality requirements and other information should be provided.

After sale Q&A

Question	Answer
1.What should do if the printing area of blanket is blurred and not complete?	Check whether the printing pressure is accurate, whether the pad is damaged, whether the blanket is damaged by impact, whether the printing plate is blind, and replace the blanket when necessary.
2.What is the reason for the blanket strip to fall off?	It may be due to the blanket being stretched too tightly, the installation of the strip is not proper, the use of the strip is not proper or the installation on the printing machine drum roller shaft is not proper.
3.How to solve the swelling of blanket surface?	Check the thickness of the blanket and lining, clean regularly with a high quality cleaning agent, and replace if the blanket is old or not suitable for the ink used.
4.What is the cause of printing dot shadow?	It may be due to improper installation of blanket, excessive printing pressure, too much ink or plate dot movement.
5. What should do if the blanket is de-layered with ink?	Check whether the blanket is corroded by solvent, whether it is squeezed too much, whether the ink is piled up at the edge, etc., and replace the blanket when necessary.
6.What is the reason for the increase of printing dots?	It may be due to the excessive pressure of the ink roller, too low hardness, improper selection of ink, imbalance between ink and water, excessive pressure between printing plate and blanket cylinder, and between blanket and impression cylinder.
7.How to deal with the accumulation of paper dust and paper powder on the surface of blanket?	Blanket should be cleaned in time to keep its surface clean and prevent the accumulation of impurities from being too thick to lose the elasticity of rubber layout.
8. What should do if the blanket is aging?	Blanket should be replaced in time, and its storage and use environment should be checked to see if it meets the requirements.
9.What if the tension of the blanket is not enough?	The tension of the blanket needs to be readjusted to ensure good contact with the plate throughout the printing process.
10.What should do when the blanket life is over?	New blanket should be replaced in time, and the old blanket should be properly handled.