LQ-Creasing Matrix
PVC Creasing Matrix
PVC Creasing Matrix minangka alat bantu kanggo indentasi kertas, utamane kasusun saka piring logam Strip lan spesifikasi garis indentasi sing beda. Garis iki duwe macem-macem jembar lan ambane, cocok kanggo macem-macem kekandelan kertas, kanggo nyukupi kabutuhan macem-macem desain lempitan. Matriks Creasing PVC dirancang kanthi kabutuhan pangguna, sawetara produk dilengkapi skala sing akurat, trep kanggo pangguna nggawe pangukuran sing akurat nalika nggawe lipatan kompleks.
Model sing ditrapake:
Flat pressing machine / mesin nglereni mati otomatis
Aplikasi:
Karton putih / kertas tembaga / karton abu-abu macem-macem karton / PVC sheet / kertas corrugated / kothak werna / kothak hadiah macem-macem packaging, etc
Kaluwihan:
- Tahan voltase kaping: Tahan voltase saka padha 10%.
- Gampang digunakake: Nyederhanakake proses lipat, nambah efisiensi produksi.
- Efek: indentasi sing cetha, kanggo njamin akurasi lempitan.
- Bisa digunakake maneh: Nduwe daya tahan lan stabilitas sing apik, bisa digunakake kaping pirang-pirang lan njaga kinerja sing padha.
Parameter
| Pilihan karton (miturut dhuwur mesin pemotong mati 23.77mm kanggo nindakake standar) | ||||
| Kertas gsm (mm) | Ketebalan gsm (mm) | Dhuwur aturan nglereni (mm) | Dhuwur aturan nglereni (mm) | Jinis |
| 小于 100 克 | 0.1 | 23.5 | 1,5 pt / 0,53 mm | 2PT1.2-1.4(0.3×0.6) |
| 150-190 | 0.15-0.25 | 23.5 | 2 pt / 0,71 mm | 2PT1.2-1.4(0.3×0.6) |
| 200-220 | 0.26-0.34 | 23.5 | 2 pt / 0,71 mm | 2PT1.2-1.4(0.3×0.6) |
| 230-280 | 0.35-0.40 | 23.4 | 2 pt / 0,71 mm | 2PT1.2-1.4(0.3×0.6) |
| 290-330 | 0.42-0.47 | 23.4 | 2 pt / 0,71 mm | 2PT1.2-1.4(0.3×0.6) |
| 350-400 | 0.50-0.56 | 23.3 | 2 pt / 0,71 mm | 2PT1.2-1.4(0.3×0.6) |
| 410-450 | 0.57-0.63 | 23.2 | 2 pt / 0,71 mm | 2PT1.5-1.9(0.3×0.6) |
| 460-500 | 0.64-0.70 | 23.1 | 3 pt / 1,05 mm | 2PT1.9-2.3(0.3×0.6) |
| 520-600 | 0.72-0.84 | 22.9 | 4 pt / 1,42 mm | 3PT1.9-2.3(0.3×0.6) |
| 620-700 | 0.84-0.98 | 22.8 | 4 pt / 1,42 mm | 3PT2.3-2.7(0.3×0.8) |
| Pilihan kertas bergelombang (miturut dhuwur pemotong die 23.77mm) | ||||
| kertas | Ketebalan gsm (mm) | Dhuwur aturan nglereni (mm) | Dhuwur aturan nglereni (mm) | Jinis |
| E pit | 0.46-0.50 | 23.2 | 2 pt / 0,71 mm | 3PT2.7-3.2(0.3×0.9) |
| E pit | 0.60-0.69 | 23 1 | 3 pt / 1,05 mm | 4PT2.7-3.2(0.3×0.9) |
| Epit | 0.70-0.80 | 23.0 | 4 pt / 1,42 mm | 4PT3.2-3.5(0.3×0.9) |
| Bpit | 0.81-0.89 | 22.9 | 4 pt / 1,42 mm | 4PT3.5-4.0(0.3×0.9) |
| Bpit | 0.90-0.96 | 22.8 | 4 pt / 1,42 mm | 4PT4.0-4.5(0.3×0.9) |
| Apit | 4.0-4.5 | 22.7 | 4 pt / 1,42 mm | 4PT2.7-3.2(1.0×7.0) |
| Bpit | 2.5-3.0 | 22.6 | 4 pt / 1,42 mm | 4PT3.5-4.0(1.0×7.0) |
| Cpit | 3.5-4.0 | 22.5 | 4 pt / 1,42 mm | 4PT3.5-4.0(1.0×5.0) |
| Epit | 1.5-2.0 | 22.4 | 4 pt / 1,42 mm | 3PT2.3-2.7(1.0×5.0) |
| Fpit | 0.8-1.0 | 22.3 | 3 pt / 1,05 mm | 2PT1.9-2.3(0.8×2.3) |
