Iwu ịkpụcha LQ-Tool
Iwu igbubi enyo (CBM)
● Igwe mma dị nkọ dị nkọ
● Ụdị abụọ: 52°, 42°, 30°
● Kwesịrị ekwesị maka ịcha akwụkwọ nke ukwuu bụ ihe na-erughị 400000pcs
● Enwere ike gbadaa n'ụdị geometric ọ bụla.
● Ihe: DE
● ọnụ:Ọnụ ego nke CB LCB
| Ọkpụrụkpụ | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Ogologo | 23.6 mm | 23.8 mm |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | Akụkụ ihu | kwuo |
| 0.71*23.6/23.8 | CBM-78 | Oji/Ọcha | ogo 30 | Isi ike HRC55-56° Isi ike nke ahụ HRC 35-36° |
| 0.71*23.6/23.8 | CBM-88 | Oji/Ọcha | 42/45 ogo | Oke ike ike HRC57-58° Isi ike HRC 37-38° |
| 0.71*23.6/23.8 | CBM-98 | Oji/Ọcha | 52 ogo | Oke ike ike HRC58-59° Isi ike HRC 40-41° |
Iwu ịkpụcha ọka
● Abrasive maching nkọ ọnụ mma
● Ụdị abụọ: ＜52°, ＜42°, ＜30°
● Kwesịrị ekwesị maka ịcha akwụkwọ nke ukwuu bụ ihe na-erughị 200000pcs
● Enwere ike gbadaa n'ụdị geometric ọ bụla
Ihe onwunwe: KR, DE
Agba: A.CB, B.LCB
| Ọkpụrụkpụ | 0.71mm (2PT) |
| Ogologo | 22.8-30 mm |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.71 mm | GL-70 | Ahụ ọla edo | Core Hardness Hrc36-37 (Soft) |
| GL-80 | Isi ike ike 38-39 (Ọkara) | ||
| GLD-70 | Ihe onwunwe Germany (Soft) | ||
| GLD-80 | Ihe onwunwe Germany (Ọkara) |
Iwu ịkpụcha Gillet (GE)
N'ọnụ na-egbu maramara na nkọ, ọ na-eme ka n'ibu ike-mgbanwe radically.
Eji maka ụdị-ịcha nke nrapado aha, PVC na ndị ọzọ na-ama ụra-UP ngwaahịa.
Ihe: CN, DE
Agba: A.CB, B.LCB
| Ọkpụrụkpụ | 0.53mm (1.5PT) | 0.71 mm (2PT) |
| Ogologo | 23.6 mm | 23.8 mm |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.71 mm | GE-70 | Ahụ na-acha anụnụ anụnụ-oji | Core Hardness Hrc36-37 (Soft) |
| GE-80 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike 38-39 (Ọkara) | |
| GED-80 | Ahụ na-acha anụnụ anụnụ-oji | Ihe onwunwe Germany | |
| 1.07 mm | GRB-70 | Ahụ na-acha anụnụ anụnụ-oji | Core Hardness Hrc36-37 (Soft) |
| GRB-80 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike 38-39 (Ọkara) | |
| GRB-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike 40-41 (ike) |
Iwu akara mma na-ejide onwe ya (HL)
A na-eji maka imepụta akara nrapado dị iche iche
Enwere ike gbadaa n'ụdị geometric ọ bụla
Ihe onwunwe: CN JP GM
Edge:A: Otu mma agụba CB , B: Ụba agụba abụọ LCB
| Ọkpụrụkpụ | 0.45mm (1.27PT) |
| Ogologo | 7.0-12.0mm |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.45mm | HL-50 | Ọnụ ọcha | Isi ike HRC41-43 |
| HL-60 | Black Edge | Isi ike HRC39-40 | |
| HL-70 | Isi ọcha | Isi ike HRC39-40 | |
| HL-80 | Ahụ ọla edo | Isi ike HRC39-40 |
Iwu Ịcha Pụrụ Iche (KL)
Eji maka spacers ， rọba ， eriri na na, na ọnwụ ibe nwere ike gafere 800000pcs
Enwere ike gbadaa n'ụdị geometric ọ bụla.
Ihe onwunwe: CN JP GM
Edge:A: Otu mma agụba CB , B: Ụba agụba abụọ LCB
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.71 mm | KL-70 | Ahụ na-acha anụnụ anụnụ-oji | Core Hardness HRC 36-37°(Nro) |
Black Cat Cutting (BL)
Eji maka spacers ， rọba ， eriri na na, na ọnwụ ibe nwere ike gafere 800000pcs.
Enwere ike gbadaa n'ụdị geometric ọ bụla.
Ihe onwunwe: CN JP GM
Edge:A: Otu mma agụba CB , B: Ụba agụba abụọ LCB
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.71 mm | BL-80 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike HRC 36-39°(Ọkara) |
Iwu mmebi iwu (WL)
1.Square ezé 3teth/1”,4 ezé/1”, 6 ezé/1”, 8 ezé/1”, {1:1}, 10 ezé/1”, 16 ezé/1”
2.Jiri maka ụdị-ịcha ụgwọ
Ihe: □ CN
Nri: Echichi
| Ọkpụrụkpụ | 0.45mm (1.27PT) | 0.71mm (2PT) | ||
| Ogologo | 8mm | 23.6 mm | 23.8 mm | |
| Nha | 1:1;2:1;3:1;6:1;8:1;10:1;12:1;16:1 | |||
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Agba nke ahụ | kwuo |
| 0.71 mm | WL-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike HRC 40-41°(ike) |
Iwu Ịdị nkọ (WLS)
1. Ugboro abụọ cutter
2. Ezé dị nkọ 16 ezé / 1 ''
3. A na-eji maka ezumike na-adọrọ adọrọ nke nta nke nta nkọwapụta: 510 × 8.16 × 0.75mm (iwu ụdị azụmahịa otu akụkụ), (2: 1, 3: 1, 1: 1: 1)
Ihe onwunwe: CN, JP, GM
Akụkụ: CB, LCB
| Ọkpụrụkpụ | 0.71 mm(2PT) |
| Ogologo | 23.0-23.8mm |
| Ọkpụrụkpụ nkọwapụta | Nọmba | Kọwaa | kwuo(isi ike)chọrọ |
| 0.71 mm | WLS-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc40 ~ 41(siri ike) |
Cutter otu akụkụ (DEX)
1. A na-eji maka ụdị-ịcha akụkụ ziri ezi
Ihe onwunwe: CN, JP, GM
Akụkụ: CB, LCB
| Ọkpụrụkpụ | 0.71mm (2PT) | 1.07mm (3PT) |
| Ogologo | 22.8-50.0mm | |
| Ọkpụrụkpụ nkọwapụta | Nọmba | Kọwaa | Nkwupụta (isi ike) chọrọ |
| 0.71 mm | DEX-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc40 ~ 41 (ike) |
Iwu mbelata dị elu (DLX)
1 Eji maka ụdị ịkpụ katọn na ihe ndị ọzọ
Ihe onwunwe: CN, JP, GM
Akụkụ: CB, LCB
| Ọkpụrụkpụ | 0.71mm (2PT) | 1.07mm (3PT) |
| Ogologo | 30.0-50.0mm | |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Kọwaa | kwuo |
| 0.71 mm | DLX-80 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike Hrc38 ~ 39 (Ọkara) |
| 1.07 mm | DLE-80 |
Iwu ebili mmiri(BL)
1.The elu nke na-adọrọ mmasị na-mere dị ka gị arịrịọ
2. Eji maka igbe na katọn A TYPE 10 PCS/B TYPE 8PCS / C TYPE 6PCS/D TYPE 4.5PCS/E TYPE 3PCS
Ihe onwunwe: CN, JP, GM
Akụkụ: CB, LCB
| Ọkpụrụkpụ | 0.71mm (2PT) |
| Ogologo | 23.6-23.8mm |
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Kọwaa | kwuo |
| 0.71 mm | BL-70 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc 36 ~ 37 |
Ịmepụta Iwu
1 Ogologo ihe na-adọrọ adọrọ mere dị ka arịrịọ gị si dị
2 The ọkpụrụkpụ bụ (2PT) 0.71mm, (3PT) 1.07mm, (4PT) 1.42mm, (6PT) 2.10mm
Ihe onwunwe: CN, JP, GM
Akụkụ: CB, LCB
| Ọkpụrụkpụ | 0.71mm (2PT) | 1.07mm (2PT) | 1.42mm (2PT) | 2.10mm (2PT) |
| Ogologo | 22.8-30.0mm | |||
| Nkọwapụta Ọkpụrụkpụ | Nọmba | Kọwaa | kwuo |
| 0.71 mm | EL-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc 41 ~ 43 |
| ELD-90 | Isi ọcha | Isi ike Hrc43 ~ 45 | |
| EL-70 | Taiwan | Isi ike Hrc38~39(Ọkara) | |
| EL-80 | Taiwan | Isi ike Hrc35 ~ 36 (dị nro) | |
| 1.07 mm | ELD-70 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc37 |
| ELD-80 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc39 | |
| 1.42mm | ELC-70 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc36 |
| 2.1mm | ELB-70 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike Hrc35 |
| 0.71 mm | EV-90 | Ahụ na-acha anụnụ anụnụ-oji | Isi ike ike Hrc41 ~ 43 (nke kachasị mkpa) |
Nchịkọta nke ihe mejupụtara nke mma ịcha anwụ anwụ
| Ụdị mma | Mma dị obere ala/Akara dị elu nwere mma nwere akụkụ abụọ/ Otu akụkụ nwere akụkụ/ Mma mma / eze eze / mma ngwakọta |
| Ụdị ígwè | /S50C/C55 |
| Ọkpụrụkpụ (mm) | 0.45/0.53/2pt/3pt/4pt/6pt |
| Ogologo (mm) | 7.0/8.0/9.5/12/23.5/23.6/23.7/23.8/30-100mm |
| Isi ike (Hrc) | 33/37/41/45/48/ |
| Akara agụba (Hrc) | 54/56/58/60/ |
| Akuku agụba | ∠30°∠42°∠52° |
| Ndị ọzọ | Ngwọta okpomoku dị elu nke ukwuu, ịkụcha ọnụ mma, nhazi mirror ọnụ mma. |
Oke nnabata nke ịdị arọ nke iwu CUTTING
| ỌkpụrụkpụNkwuputa | Ntụaka | Mba ụwaỌkọlọtọ | Ụkpụrụ ụlọ ọrụ | |
| Ndidi | Min Max | |||
| 0.45 | 0.44 | ±0.025 | ± 0.010 | 0.430 ~ 0.450 |
| 2PT | 0.71 | ±0.030 | ± 0.010 | 0.700 ~ 0.720 |
| 3PT | 1.05 | ±0.040 | ± 0.010 | 1.050 ~ 1.070 |
| 4PT | 1.42 | ±0.050 | ± 0.015 | 1.395 ruo 1.425 |
Mmetụta nke Angle Blade na ngwaahịa
Nhọrọ agụba
1. Ọdịiche nke mma dị elu na nke dị ala
Ọdịiche dị n'etiti mma dị elu na nke dị ala bụ na mma dị elu na-adabere na mma dị ala wee na-egweri nkuku n'akụkụ abụọ iji mee ka agụba ya dị warara, n'ozuzu ihe dịka 2mm.
ngwugwu
| Ọkpụrụkpụ | Ọnụọgụ igbe katọn | Igwe mmiri |
| 0.45mm (1.27PT) | 100pcs/igbe | 100M/ Igwe mmiri |
| 0.53mm (1.5PT) | 100pcs/igbe | 100M/ Igwe mmiri |
| 0.71mm (2PT) | 100pcs/igbe | 100M/ Igwe mmiri |
| 1.07mm (3PT) | 70pcs/igbe | 70M/ Igwe mmiri |
| 1.42mm (4PT) | 50pcs/igbe | 50M/ Igwe mmiri |
| 2.10mm (6PT) | 35pcs/igbe | 35M/ Igwe mmiri |
Mpaghara ngwa
Ọnwụ-Ịcha maka igbe nkwakọ ngwaahịa
