Matrics LQ-Creasing
Matrics Crychu PVC
Mae Matrics Creasing PVC yn offeryn ategol ar gyfer mewnoliad papur, mae'n cynnwys plât metel stribed yn bennaf a gwahanol fanylebau llinellau mewnoliad. Mae gan y llinellau hyn amrywiaeth o led a dyfnder, sy'n addas ar gyfer gwahanol drwch o bapur, i ddiwallu anghenion gwahanol ddyluniadau plygu. Mae Matrics Creasing PVC wedi'i ddylunio gydag anghenion defnyddwyr mewn golwg, mae gan rai cynhyrchion raddfa gywir, sy'n gyfleus i ddefnyddwyr wneud mesuriadau cywir wrth wneud plygu cymhleth.
Modelau sy'n berthnasol:
Peiriant gwasgu fflat / peiriant torri marw awtomatig
Ceisiadau:
Cardbord gwyn / papur copr / cardbord llwyd amrywiol gardbord / dalen PVC / papur rhychiog / blwch lliw / blwch rhodd pecynnu amrywiol, ac ati
Manteision:
- Gwrthsefyll amseroedd foltedd: Gwrthsefyll foltedd na 10% tebyg.
- Hawdd i'w defnyddio: Symleiddio'r broses blygu, gwella effeithlonrwydd cynhyrchu.
- Effaith: mewnoliad clir, i sicrhau cywirdeb plygu.
- Ailddefnyddiadwy: Mae ganddo wydnwch a sefydlogrwydd da, gellir ei ddefnyddio lawer gwaith a chynnal yr un perfformiad.
Paramedr
| Detholiad cardbord (yn ôl uchder peiriant torri marw 23.77mm i wneud y safon) | ||||
| Papur gsm(mm) | Trwch gsm (mm) | Uchder rheol torri (mm) | Uchder rheol torri (mm) | Math |
| 小于 100 克 | 0.1 | 23.5 | 1.5pt/0.53mm | 2PT1.2-1.4(0.3×0.6) |
| 150-190 | 0.15-0.25 | 23.5 | 2pt/0.71mm | 2PT1.2-1.4(0.3×0.6) |
| 200-220 | 0.26-0.34 | 23.5 | 2pt/0.71mm | 2PT1.2-1.4(0.3×0.6) |
| 230-280 | 0.35-0.40 | 23.4 | 2pt/0.71mm | 2PT1.2-1.4(0.3×0.6) |
| 290-330 | 0.42-0.47 | 23.4 | 2pt/0.71mm | 2PT1.2-1.4(0.3×0.6) |
| 350-400 | 0.50-0.56 | 23.3 | 2pt/0.71mm | 2PT1.2-1.4(0.3×0.6) |
| 410-450 | 0.57-0.63 | 23.2 | 2pt/0.71mm | 2PT1.5- 1.9(0.3×0.6) |
| 460-500 | 0.64-0.70 | 23.1 | 3pt/1.05mm | 2PT1.9- 2.3(0.3×0.6) |
| 520-600 | 0.72-0.84 | 22.9 | 4pt/1.42mm | 3PT1.9- 2.3(0.3×0.6) |
| 620-700 | 0.84-0.98 | 22.8 | 4pt/1.42mm | 3PT2.3- 2.7(0.3×0.8) |
| Detholiad papur rhychog (yn ôl uchder y torrwr torri marw o 23.77mm) | ||||
| Papur | Trwch gsm (mm) | Uchder rheol torri (mm) | Uchder rheol torri (mm) | Math |
| E pwll | 0.46-0.50 | 23.2 | 2pt/0.71mm | 3PT2.7- 3.2(0.3×0.9) |
| E pwll | 0.60-0.69 | 23 1 | 3pt/1.05mm | 4PT2.7- 3.2(0.3×0.9) |
| Epydew | 0.70-0.80 | 23.0 | 4pt/1.42mm | 4PT3.2-3.5(0.3×0.9) |
| Bpydew | 0.81-0.89 | 22.9 | 4pt/1.42mm | 4PT3.5-4.0(0.3×0.9) |
| Bpydew | 0.90-0.96 | 22.8 | 4pt/1.42mm | 4PT4.0-4.5(0.3×0.9) |
| Apydew | 4.0-4.5 | 22.7 | 4pt/1.42mm | 4PT2.7-3.2(1.0×7.0) |
| Bpydew | 2.5-3.0 | 22.6 | 4pt/1.42mm | 4PT3.5-4.0(1.0×7.0) |
| Cpydew | 3.5-4.0 | 22.5 | 4pt/1.42mm | 4PT3.5-4.0(1.0×5.0) |
| Epydew | 1.5-2.0 | 22.4 | 4pt/1.42mm | 3PT2.3-2.7(1.0×5.0) |
| Ddpydew | 0.8-1.0 | 22.3 | 3pt/1.05mm | 2PT1.9- 2.3(0.8×2.3) |
