LQ-TOOL Cabron Stainless Steel Doctor Blade
Specification
W20/30/35/40/50/60mm*T0.15mm
W20/35/50/60mm*T0.2mm
Substrate
Carbon steel, stainless steel, carbon steel coating.
Features
1. The hardness is 580HV+/-15, the tensile strength is 1960N/mm, and the cylinder is not easy to wear.
2. Widely used in gravure and flexo printing
3. Use Swedish high-quality steel belt to produce and manufacture with unique high-precision technology.
4. Each box is 100M, and the patented anticorrosive plastic box packaging makes the quality more stable and durable. There is no need to open the box during use, and it is ready to use.
Application
The following information must be known before selecting scraper:
1. Types of printing: intaglio, flexographic
2. Printing substrate: paper, plastic film, aluminum foil, etc
3. Ink characteristics: soluble, water-based, coating adhesion
How to install
1. When you open the packing box and pull it out, please hold the knife body to prevent being scratched by the knife edge.
2. Check and clean the scraper.
3. The side with the knife edge must face upward.
4. The scraper must be clamped in the standard tool holder. The knife lining and the tool holder should be clean without residual ink hard block, so as to ensure the perpendicularity of the scraper after clamping.
5. For the distance between the ink scraper, the knife lining and the knife holder, please refer to the installation dimensions in the figure below. The correct installation of the scraper can prevent the breakage of the edge of the ink scraper and prolong the service life of the ink scraper.