LQ-FP Analog Flexo Plates for Carton (2.54) & Corrugated
High plate hardness for reliable print quality
● Suitable for a broad range of substrates
● Very good and consistent ink transfer with excellent area coverage
● High solid density and minimum dot gain in the halftones
● Intermediate depths with excellent contour definition Efficient handling and superior durability
Efficient handling and superior durability
● Convenient plate processing with short exposure times, light finishing could be avoided
● High print run stability due to superior resistance against mechanical stress
● Long lifetime due to robust and durable material
● Reduced cleaning cycles due to special surface properties
Specifications
| SF-L | |||||||
| Analogue Plate for Carton (2.54) & Corrugated | |||||||
| 254 | 284 | 318 | 394 | 470 | 550 | 700 | |
| Technical Characteristics | |||||||
| Thickness (mm/inch) | 2.54/0.100 | 2.84/0.112 | 3.18/0.125 | 3.94/0.155 | 4.70/0.185 | 5.50/0.217 | 7.00/0.275 |
| Hardness(Shore Å) | 50 | 48 | 47 | 43 | 42 | 40 | 40 |
| Image Reproduction | 3 –95%100lpi | 3 – 95%100lpi | 3 – 95%100lpi | 3 – 90%80lpi | 3 – 90%80lpi | 3 – 90%60lpi | 3 – 90%60lpi |
| Minimum Isolated Line(mm) | 0.30 | 0.30 | 0.30 | 0.30 | 0.30 | 0.30 | 0.30 |
| Minimum Isolated Dot(mm) | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 |
| Back Exposure(s) | 30-40 | 35-60 | 50-70 | 60-80 | 90-110 | 150-200 | 280-320 |
| Main Exposure(min) | 8-15 | 8-15 | 8-15 | 8-15 | 8-18 | 8-18 | 8-18 |
| Washout Speed(mm/min) | 130-150 | 120-140 | 100-130 | 90-110 | 70-90 | 70-90 | 70-90 |
| Drying Time (h) | 1.5-2 | 1.5-2 | 1.5-2 | 2-2.5 | 3 | 3 | 3 |
| Post ExposureUV-A (min) | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Light Finishing UV-C (min) | 0-5 | 0-5 | 0-5 | 0-5 | 0-5 | 0-5 | 0-5 |
Note
1.All processing parameters depend on, among others, the processing equipment, lamp age and the type of washout solvent. The above-mentioned values are only to be used as a guide.
2.Suitable for all water based and alcohol-based printing inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%, not designed for solvent or UV inks) Alcohol based ink can be treated as water ink.
3.All the Flexo plates in the market are all not comparable with solvent ink, they can use but it is their(customers) risk. For UV Ink, so far all of our plates cannot works with UV inks, but some of customer use it and get the good result but it doesn’t mean others one can get the same result. We are now researching the new type of Flexo plates it is works with UV ink.
